管廊用聚氨酯密封膏 pg521 131 6657 0832
聚氨酯建筑密封膏属双组份反应固化型，有A、B两组份组成。A组分为乳白色或浅黄色粘稠状聚氨酯预聚体，B组分为固化剂与助剂等混合脱水而成的黑色膏状体或液体，固化后具有一定的弹性及粘结性，（A组份：B组份=10：0.8～1.2）。
Polyurethane building sealant is a two component reactive curing type, consisting of two components of A and B. The A component is milky white or light yellow viscous polyurethane prepolymer, and group B as curing agent and additives mixed dehydration black paste or liquid, after curing with elasticity and adhesion of the (A group: B group =10:0.8 ~ 1.2).
原理
principle
基层处理：被粘面必须进行整齐处理（可用手提切割机，砂轮，刚刷等），使涂胶面露出牢固的结构层。
base treatment: the adhesive surface must be handled neatly (portable cutting machine, grinding wheel, rigid brush, etc.), so that the surface of the coating is exposed to a solid structure layer.
接缝表面必须保证完全干燥、清洁、无霜。表面所有灰尘和水泥稀浆必须清刷处理干净。金属表面的锈层及保护漆也需除去。如构筑物不干，可用喷灯烘干。
The joint surface must be completely dry, clean and frost free. All dust and cement slurry on the surface must be cleaned and cleaned. Rust and protective paint on metal surface also need to be removed. Such structures do not use torch drying.
多孔表面涂胶前需先涂底涂料. 底涂料只需刷涂一薄层,待其表面不粘手后方可涂密封胶嵌缝.（本公司有配套的各种底涂料供给）。
Before the first coating porous surface coating primer primer. only need to brush a thin layer, the surface is not sticky rear can be coated with sealant. (the company is supporting the various bottom paint supply).
管廊用聚氨酯密封膏 pg521 131 6657 0832
特点
Characteristic
优良的耐磨性、低温柔软性，性能可调节范围较广，机械强度大，粘接性好，弹性好，具有优良的复原性，可适合动态接缝和变形缝、伸缩缝。耐候性好，耐油性优良，耐生物老化且价格低廉。
It has excellent abrasion resistance, low softness and softness, wide range of adjustable properties, good mechanical strength, good adhesion, good elasticity, excellent resilience, and suitable for dynamic joints, deformation joints and expansion joints. Good weather resistance, good oil resistance, aging resistance and low price.
聚氨酯密封胶也有一些缺点。如：不能长期耐热；浅色配方容易受紫外光老化；单组分胶贮存稳定性受包装及外界影响较大，通常固化较慢；高温热环境下可能产生气泡和裂纹；许多场合需要底涂。同时聚氨酯密封胶耐水性也较差，特别是耐碱水性欠佳。
Polyurethane sealant also has some disadvantages. Such as: not long-term heat; light formula vulnerable to UV aging; single component storage stability by packaging and external influence, usually curing slowly; may produce bubbles and cracks under high temperature environment; many occasions need primer. At the same time, polyurethane sealant is also poor in water resistance, especially alkali resistance.
适用范围
Applicable scope
该产品使用于土木建筑业、交通运输业、混凝土预制件等建材的连接及施工缝的填充密封。高级道路、桥梁、飞机跑道、地下管道、接头处的连接密封以及隧道和建筑物的伸缩缝与变形缝。
The product is used for the connection of building materials, such as civil engineering, transportation, precast concrete and filling sealing of construction joints. Connections and seals of advanced roads, bridges, runways, underground pipes, joints, and expansion joints and deformation joints of tunnels and buildings.
管廊用聚氨酯密封膏 pg521 131 6657 0832
